Date: November 17, 2023
At Champion Services, we understand that a malfunctioning heating or air conditioning system can be a major inconvenience. That’s why we provide comprehensive hvac services to our customers in Evanston, WY and Ogden, UT. Our family-owned and operated business has been providing top-notch service since 1982. We are available 24/7 for all your repairs, maintenance, new installations, and replacements.
Our experienced technicians are knowledgeable in all aspects of HVAC systems. From locating the filter in your system to resetting the ignition switch, we have you covered. We also have the expertise to diagnose and repair other problems that may arise with your system.
At Champion Services, we believe in providing quality services at an affordable price. No matter what type of repairs you need for your HVAC system, you can trust us to get the job done right!
Locate the Filter in Your HVAC System
At Champion Services, we provide top-notch hvac services to our customers in Evanston, WY and Ogden, UT. One of the most important things you can do for your HVAC system is to locate and replace the filter regularly. This will help keep your system running efficiently and can save you money on energy costs. Here’s how to locate the filter in your HVAC system:
Check Air Handler or Furnace
The first place to check is your air handler or furnace. The filter should be located either in the return air duct or inside the blower compartment. If it’s located in the return air duct, it will be a flat panel filter that slides into a metal frame. If it’s located inside the blower compartment, it could be either a flat panel filter or an accordion-style filter that fits into a slot.
Check Supply Registers
If you don’t find the filter in either of those locations, check all of your supply registers (the vents where air comes out). Some systems have filters installed directly into the registers themselves. They’re usually easy to spot because they’ll be slightly larger than the register opening and may have a metal frame around them.
Check Return Grille
If you still haven’t found the filter, check your return grille (the vent where air goes back into your HVAC system). On some systems, there’s a removable panel over the return grille that can be removed to access the filter.
Contact Professional Help
If you’ve checked all of these locations and still haven’t been able to locate your filter, it may be time to contact a professional for help. At Champion Services, we offer comprehensive HVAC services including locating and replacing filters in hard-to-reach places. Give us a call today for more information!
Possible Solution – Check and Clean the Burners
When trying to diagnose a furnace issue, one of the first steps is to check and clean the burners. The burners are located in the combustion chamber of the furnace and they are responsible for providing heat to your home. Over time, dirt and debris can accumulate on the burners which can affect their performance. This can cause your furnace to run inefficiently or not at all.
Checking the Burners
The first step in checking and cleaning your furnace burners is to locate them. In most furnaces, they will be found near the bottom of the unit in a rectangular compartment. Once you have located them, you should inspect them for any signs of dirt or debris. If you notice any buildup, it will need to be removed before you can proceed with cleaning them.
Cleaning the Burners
Once you have inspected the burners for any buildup, you can begin cleaning them. You should start by turning off power to your furnace before beginning this process. Then, use a vacuum cleaner with a brush attachment to remove any dust or debris from around the burner area. After this is done, use a damp cloth or paper towel to wipe down each burner individually. Be sure to pay extra attention to any areas that may have had dirt or debris build up as these will need more thorough cleaning.
Testing the Burners
After you have cleaned all of your furnace’s burners, it is important to test them to make sure that they are functioning properly. To do this, turn on power to your furnace and then turn up its thermostat setting until it kicks on. When it does, listen for any unusual noises coming from around the burner area as this could indicate an issue with one of your burners that needs further investigation. If everything sounds normal and there are no other issues present, then you should be good to go!
At Champion Services we understand how important it is for our customers’ furnaces to be running properly at all times. That’s why we recommend checking and cleaning your furnace’s burners regularly as part of regular maintenance for optimal performance and efficiency throughout its lifespan!
Reset ignition switch to restore furnace heat; Champion Services offers 24/7 emergency service.
Reset the Ignition Switch
If you have checked and cleaned the burners and still experience no heat, you may need to reset the ignition switch. This is an easy process that can be done in a few simple steps.
Step 1: Locate the Reset Button
The first step is to locate the reset button on your furnace. This button is usually located near the bottom of the unit. It will be red or yellow in color and should be clearly marked as a “reset” button.
Step 2: Press and Hold the Reset Button
Once you have located the reset button, press and hold it for approximately 10 seconds. During this time, you should hear a clicking sound as the furnace begins to reset itself.
Step 3: Check for Heat Output
Once you have released the reset button, check to see if your furnace is producing heat. You should notice a slight increase in temperature within minutes of pressing the reset button. If your furnace does not produce any heat after completing these steps, contact Champion Services for further assistance with your HVAC system.
Champion Services has been providing top-notch HVAC services since 1982 and we are here to help with all of your heating needs! We offer 24/7 emergency service, so don’t hesitate to call us at (801) 830-4410 if you need assistance with your furnace or other hvac system issue!
Other Problems
It is possible that the filter in your HVAC system is not the only issue causing problems with your heating or cooling. If you have checked and cleaned the burners and reset the ignition switch and still are having trouble, there are a few other potential issues to consider.
Faulty Thermostat
A faulty thermostat can cause an HVAC system to underperform or fail to turn on at all. To check if this is the problem, simply replace the batteries in your thermostat and see if it works as normal. If it does not, you may need to call a professional HVAC technician to replace the thermostat entirely.
Clogged Condensate Drain Line
The condensate drain line is responsible for removing moisture from your air conditioner’s evaporator coil. If this line becomes clogged, it can cause water to back up into your air conditioner, leading to poor performance or even system failure. To fix this issue, you will need to clean out the drain line using a wet/dry vacuum or similar device.
Refrigerant Leaks
Refrigerant leaks are a common issue in hvac systems, and they can lead to reduced cooling power or even system failure. If you suspect that your system has a refrigerant leak, you should contact a professional technician as soon as possible for repairs – attempting to fix a refrigerant leak yourself can be dangerous and illegal in some areas.
Dirty Evaporator Coil
The evaporator coil is responsible for absorbing heat from the air inside your home, so if it becomes dirty it can reduce its effectiveness and lead to poor performance from your HVAC system. To clean the coil, you should first shut off power to your unit before carefully removing any debris from its surface using a soft brush or cloth. You may also want to use an evaporator coil cleaner specifically designed for this purpose.
No matter what kind of issue you are having with your heating or cooling system, Champion Services is here to help! Our experienced team of technicians is available 24/7 for emergency repairs and maintenance services throughout Evanston WY and Ogden UT – just give us a call today!
Champion Services offers 24/7 customer service to help troubleshoot and repair HVAC problems.
Conclusion
At Champion Services, we understand that it can be frustrating when your HVAC system is not working properly. We hope that this article has provided you with some insight into potential causes of your HVAC problems and how to fix them. If you have any further questions or need assistance with HVAC repairs or maintenance, please don’t hesitate to contact our team of experienced professionals. We are available 24/7 to provide you with the best customer service experience possible. Thank you for choosing champion services!
For fast and reliable service, contact champion services today! With over 38 years of experience, our family-owned and operated business has been providing top-notch plumbing, HVAC, and electrical services to the Evanston, WY and Ogden, UT area. We are available day and night to provide repairs, maintenance, new installations, and replacements at a fair and reasonable price. Don’t wait – call us now to book an appointment and experience the champion services difference!