Date: May 17, 2023
Introduction
At Champion Services, we understand the importance of having a reliable hot water supply in your home. That’s why we’re here to help you when your hot water suddenly becomes too hot. In this blog post, we’ll discuss four potential causes of the problem and how you can address them. We’ll also provide information on our experienced plumbers who offer knowledgeable water heater installation and repair services in the GTA, as well as advice on the best tankless and tank hot water heaters available.
Mineral Build Up
One of the potential causes of hot water suddenly becoming too hot is mineral build-up in the water supplies from areas such as Brampton, Mississauga, or Georgetown. This occurs when minerals like calcium and magnesium are present in the water supply and deposit themselves on the walls of pipes, heaters, and other metal components of a hot water system. Over time, these mineral deposits can accumulate and cause problems with the flow of water. As a result, it can cause hot water to become too hot.
Signs of Mineral Build Up
It is important to be aware of signs that indicate mineral build-up in your hot water system. Some common signs include: discoloured or cloudy water; a metallic taste or smell coming from the tap; an increase in pressure when running hot water; slow draining sinks or tubs; and sediment in the bottom of your hot water heater tank. If you notice any of these signs, it may be an indication that there is mineral build-up in your system.
Removing Mineral Build Up
If you suspect that mineral build-up is causing your hot water to become too hot, there are several steps you can take to address this issue. The first step is to flush out your system by running all cold taps for several minutes until the water runs clear. This will help remove any loose particles that have built up over time. You can also install a whole house filter which will help reduce further accumulation of minerals and keep your system clean. Finally, if necessary, you can hire a professional plumber to do a full inspection and cleaning of your system to ensure all mineral build-up has been removed and that everything is functioning properly.
Overall, mineral build-up can be one potential cause for why your hot water suddenly becomes too hot. It is important to be aware of signs that indicate this issue so you can take appropriate steps to address it before it becomes a bigger problem.
| Area | Minerals Present | Signs of Build Up | Solutions |
| Brampton, Mississauga, Georgetown | Calcium & Magnesium | Discoloured/cloudy water; metallic taste/smell; increased pressure; slow draining sinks/tubs; sediment in heater tank | Flush system; install whole house filter; hire professional plumber for full inspection & cleaning |
Faulty Heater Element
A faulty heater element is another potential cause of hot water suddenly becoming too hot. The heater element is a vital component of the water heating system and when it fails, it can cause the water to become too hot. It is important to identify and repair this issue as soon as possible, as it can be dangerous if left unchecked.
Identifying a Faulty Heater Element
The first step in identifying a faulty heater element is to inspect the unit for signs of damage or corrosion. If there are any visible signs of damage, then this could indicate that the heater element needs to be replaced. It is also important to check the temperature settings on the thermostat, as incorrect settings can also lead to overheating.
Replacing a Faulty Heater Element
If a faulty heater element is identified, then it should be replaced by an experienced professional. Replacing the heater element requires specialized knowledge and tools and should not be attempted by an inexperienced person. A qualified technician will be able to safely replace the heater element and ensure that it is correctly installed and functioning properly.
Preventing Future Issues
Once the faulty heater element has been replaced, it is important to take steps to prevent future issues with hot water becoming too hot. Regular maintenance of your water heating system can help ensure that all components are functioning properly and that any potential issues are identified before they become serious problems. Additionally, checking your thermostat settings regularly can help ensure that your water temperature stays at a safe level.
Expert Water Heater Installation and Repair in the GTA
Ours offers expert plumbers skilled at water heater installation and repair in the GTA area who can provide advice on selecting the best tankless or tank hot water heaters available for your home or business. With their experience and expertise, ours technicians can diagnose any issues with your current system quickly and get them fixed fast so you can enjoy reliable hot water again soon!
Pressure Relief Valve Issue
A pressure relief valve issue is another possible cause of hot water suddenly becoming too hot. This valve is located on the side of the heater tank and can be tested by flipping the switch. If the pressure relief valve is not functioning properly, it may cause a build up of pressure in the water heater system resulting in hot water that is hotter than necessary.
How to Test for a Pressure Relief Valve Issue
Testing for a pressure relief valve issue is relatively simple and requires minimal effort. It involves turning off the power to the water heater, then flipping the switch on the side of the heater tank to see if it releases any steam or water from the overflow pipe. If steam or water is released, this indicates that there is an issue with pressure build-up in the system which needs to be addressed.
What Causes a Pressure Relief Valve Issue?
There are several potential causes of a pressure relief valve issue including mineral build-up, corrosion, or a faulty element in the valve itself. Mineral build-up can occur when hard water passes through pipes in areas such as Brampton, Mississauga, or Georgetown and deposits minerals on internal components of the valve. Corrosion can also lead to a faulty element within the valve itself which prevents it from working properly.
Resolving a Pressure Relief Valve Issue
If you suspect that your hot water has become too hot due to a pressure relief valve issue, it’s important to get it checked out by an expert right away. A professional plumber skilled at water heater installation and repair in GTA will be able to diagnose and repair any issues with your pressure relief valves quickly and efficiently. They can also advise you on whether it would be best to replace your existing tank hot water heater with a tankless one which could help reduce energy costs over time.
Main Idea: Pressure relief valve issue can cause hot water to become too hot and needs to be checked by a professional plumber. Key findings: Causes include mineral build-up, corrosion, or faulty element; testing requires flipping switch on heater tank; tankless heater may reduce energy costs.
Expert Water Heater Repair
At Champion Services, we understand that water heater issues can be confusing and difficult to diagnose. That’s why our team of experienced plumbers is always on hand to provide expert advice and repair services for hot water heaters in the GTA. Whether you have a tankless or tank hot water heater, our knowledgeable technicians can help you identify the cause of your hot water issue and provide effective solutions.
Diagnosing The Problem
The first step in resolving any hot water heater issue is to accurately diagnose the problem. Our experienced plumbers are skilled at diagnosing even the most complex hot water heater problems, from mineral build-up in hard water supplies to faulty heater elements or pressure relief valve issues. We use state-of-the-art diagnostic equipment to pinpoint the source of the problem quickly and accurately so we can get your hot water running again as soon as possible.
Repair & Replacement Solutions
Once we have identified the source of the issue, our team will work with you to determine the best course of action for your particular situation. In some cases, a simple repair may be enough to restore your hot water supply. In others, it may be necessary to replace your existing unit with a new tankless or tank hot water heater. Our technicians can provide expert advice on which type of system would best suit your needs and budget.
Professional Installation & Maintenance
In addition to providing repairs for existing systems, our team also offers professional installation and maintenance services for both tankless and tank hot water heaters in the GTA. We will take care of all aspects of installation, from selecting the right model for your home or business to ensuring that all connections are properly sealed and secure. We also offer regular maintenance services designed to keep your system running smoothly and efficiently for years to come.
When it comes to expert hot water heater repair, replacement, installation or maintenance services in Brampton, Mississauga or Georgetown, Champion Services has you covered! Our knowledgeable plumbers have years of experience working with all types of hot water systems and are always ready to help you get your hot water running again quickly and safely. Contact us today for more information about our services!